Heavy-Duty Drawer Slides - 100 to 770 lb

Heavy Duty Drawer Slide

Projects & Ideas

Inspiration for garage, workshop and home storage projects built on AOLISHENG heavy-duty slides.

Popular Brands

Sale Products

Side Mounted Push Open Drawer Slide F1245

AOLISHENG 100 lb Push-to-Open Full Extension Side Mount Drawer Slides for Kitchen, Bathroom & Cabinets – 3 Pairs (F1245)

AOLISHENG 100 lb Stainless Steel Full Extension Drawer Slides – Thickened, 1 Pair (AU4510) for Cabinets & Toolboxes -...

AOLISHENG 100 lb Thickened Stainless Steel Full Extension Drawer Slides for Kitchen, Office & Cabinets – 2 Pairs (U1245)

AOLISHENG 150 lb Heavy-Duty Full Extension Ball Bearing Stainless Steel Drawer Slides – Tool Box, 1 Pair (W5115)

AOLISHENG 150 lb Locking Heavy-Duty Drawer Slides for Truck Toolboxes, RVs, Industrial & Workshop Storage – 1 Pair (D5115)

AOLISHENG 150 lb Locking Heavy-Duty Drawer Slides for Truck Toolboxes, RVs, Industrial & Workshop Storage – 1 Pair (D5115)

AOLISHENG 265 lb Heavy-Duty Bottom Mount Drawer Slides for Stair Storage, Cabinets & Under-Stair Lockers – 1 Pair (A2047)

Heavy Duty Drawer Slide — 24 models available

Heavy Duty Drawer Slides from 150 lb to 770 lb

Heavy duty drawer slides are a different part from furniture slides. Where a 100 lb kitchen rail uses light-gauge steel, our heavy range runs cold-rolled steel or stainless steel with a thicker section, larger ball bearings and a reinforced inner rail, so the slide does not flex when the drawer is pulled out fully loaded. This collection starts at 150 lb and runs to a 770 lb twin-slide set.

The heavy duty range is what customers use for truck toolboxes, RV and camper storage, outdoor kitchen drawers, workshop benches, stair storage and server racks. Full extension is standard across most of the range — a 500 lb slide that only extends three quarters is not much use when the toolbox is deep.

Three choices matter more than anything else here: the load rating, the mounting surface (a 500 lb slide is only as strong as what it is screwed into) and whether you need locking to stop the drawer rolling open in a moving vehicle.

Heavy Duty Options

Heavy Duty Drawer Slides FAQ

What counts as a heavy duty drawer slide?

In practice, anything rated above roughly 150 lb. Below that you are in furniture hardware; above it the slide needs thicker steel, a larger bearing cage and a mounting bracket that spreads the load into the cabinet frame rather than a single screw.

Will a 500 lb slide really hold 500 lb?

The rating is the load the pair can carry when correctly mounted to a solid surface, evenly distributed and cycled at normal speed. Real-world capacity drops if the load sits at the very front of an extended drawer, if the slide is mounted to thin particle board, or if the drawer is slammed. Size up rather than to the limit.

Why do my RV drawers open while driving?

Standard ball bearing slides have no detent, so vibration and braking walk the drawer open. A locking slide such as the D7625 latches in the closed position and releases with a lever, which is the standard fix for RVs, campers and service vehicles.

Steel or stainless steel for outdoor use?

Cold-rolled steel with a zinc finish is fine indoors and in a dry garage. For outdoor kitchens, marine use, or anywhere the slide gets washed down, choose stainless steel — the zinc coating is the only thing protecting plain steel, and once it is scratched the rust starts.

How much clearance do heavy duty slides need?

Most side mount heavy duty slides need about 1/2" to 3/4" of clearance on each side of the drawer, though the exact figure differs by model. Measure your cabinet opening width, subtract the drawer box width, and check that what is left matches the slide thickness — this is the most common fitting mistake.

Can heavy duty slides be mounted at the bottom?

Yes, and it is often the better answer for very heavy drawers. Bottom mount puts the load into the cabinet floor instead of the side walls, which suits stair storage, under-stair lockers and safes. See our bottom mount slide rails for those builds.

Not sure which rating fits your build? Start from the heaviest thing the drawer will ever carry, then add a 25–30% safety margin — our team can confirm the right model from your cabinet opening width and drawer length.

Product Series in This Category

Series	Type	Load
2576	Heavy-Duty Side-Mount Slide Rail (Stainless avail.)	500 lb (≈227 kg)
7625	76 mm Locking Heavy-Duty Slide Rail	220 kg (≈485 lb)
2071	Heavy-Duty Ball-Bearing Slide Rail	330 lb (≈150 kg)
2053	Heavy-Duty Side-Mount Slide Rail	265 lb (≈120 kg)
5115	51 mm Heavy-Duty Slide Rail	68 kg (≈150 lb)

Model series per ALS 2026 catalogue / product listing.

Not sure which slide fits this job?

Our drawer slide buying guide walks through load rating, extension type, mount style and material, and lists the AOLISHENG series for each one. Or send us your cabinet opening, drawer length and target load and we will confirm the match.

Related categories

Request a quote · Contact AOLISHENG