AOLISHENG 180 lb Double Stack 4-Section Drawer Slides – Extended Reach Full Extension, Side Mount, Detachable – 1 Pair (A7625K1)
The AOLISHENG A7625K1 is a double-stack, four-section full-extension drawer slide rated for 180 lb (80 kg). Its dual-stack rail design roughly doubles the reach of a standard slide, giving complete access to deep storage drawers in server racks, ATMs, vending machines, toolboxes, RV storage and under-stairs units. Side-mount, detachable ball-bearing construction with an ecoating and zinc electroplating finish, rated for over 100,000 open/close cycles and a service life exceeding 30 years. Available in 24″ and 30″.
| 长度 |
24" ,30" ,40" |
|---|
Specifications
| Type | 76 mm Wide Locking Heavy-Duty Slide Rail |
|---|---|
| Material | Q235 Cold-rolled Steel / 304 Stainless Steel |
| Mounting | Side-mounted |
| Load Capacity | 220 kg (≈485 lb) |
| Width | 76 mm |
| Installation Thickness | 19.2 ± 0.5 mm |
| Material Thickness | 2.5 × 2.2 × 2.5 mm |
| Surface Treatment | Blue Zinc Plating |
| Available Lengths | 8 – 80 inch |
Specifications per ALS 2026 product catalogue.
AOLISHENG 7625 Series Specifications
76MM WIDE HEAVY-DUTY SLIDE RAIL
| Load Capacity | 220 kg / 485 lb |
|---|---|
| Installation Method | Side-mounted |
| Width | 76 mm |
| Material | Q235 Cold-rolled Steel / 304 Stainless Steel |
| Surface Treatment | Blue Zinc Plating |
| Material Thickness | 2.5 × 2.2 × 2.5 mm |
| Installation Thickness | 19.2 ± 0.5 mm |
| Available Lengths | 8 – 80 inch (non-locking); 12 – 60 inch (locking) |
Source: Per ALS 2026 catalogue
Choosing between series?
Read the drawer slide buying guide for a side-by-side on load rating, extension type, mount style and material, including a quick-pick table by application.
This slide belongs to
Double Stack 4-Section Drawer Slides with Extended Reach
Most full-extension slides let a drawer travel roughly its own length. The A7625K1 uses a double-stack, four-section rail to roughly double that reach — so a deep drawer comes all the way out and stays supported, instead of leaving the back half unreachable. It is built for deep storage where access matters more than raw load rating: server racks, ATMs and vending machines, tool cabinets, RV and vehicle storage, under-stairs units and industrial machinery drawers.
Key Features
- Double Reach, 4-Section Extension: dual-stack rails provide roughly twice the extension length of a standard slide, for full access to deep storage drawers.
- 180 lb (80 kg) Load Rating: a ball-bearing system carries heavy loads with friction-free, low-noise movement.
- Full Extension & Detachable: the four-section design extends completely; detachable rails simplify installation and drawer removal.
- Corrosion-Resistant Finish: ecoating plus zinc electroplating isolates the rail from water and air, preventing oxidation and rust.
- Tested & Long-Lasting: rated for over 100,000 open/close cycles with a normal service life exceeding 30 years.
- Quiet Operation: quiet, friction-free travel with low noise in daily use.
Specifications
| Model | A7625K1 |
| Type | Double Stack 4-Section Drawer Slide |
| Load Capacity | 180 lb / 80 kg |
| Structure | 4-section (4-fold) full extension |
| Extension Reach | Approx. 2× a standard slide |
| Mounting Type | Side mount |
| Detachable | Yes |
| Finish | Ecoating + zinc electroplating |
| Available Sizes | 24″, 30″ |
| Rail Width | 76 mm |
| Steel Thickness | 2.5 mm |
| Installation Clearance | 39.2 mm +-0.5 mm per side |
| Durability | 50,000+ cycles |
| Handle | Required — this is not a push-to-open slide |
| Sold As | 1 pair (left + right) |
Applications
- ATM and vending machine drawers
- Server and computer equipment racks
- Toolbox and workshop storage units
- Vehicle modification and RV storage drawers
- Under-stairs and other deep storage solutions
- Industrial machinery drawers
- Office and cabinetry installations requiring extended reach
Installation Notes
- A handle is required — this slide pulls inward and has no push-to-open function.
- Keep both slides parallel during installation; misalignment will cause binding.
- Allow 39.2 mm +-0.5 mm clearance on each side.
- Detach the rail before fitting to simplify installation.
Other AOLISHENG Options
Need push-to-open? See F1245 or P4510. Need higher capacity? Our heavy-duty locking range includes 500 lb and 660 lb models. Contact us and we’ll match the right slide to your travel and load requirements.
AOLISHENG positioned as a high-end quality hardware supply brand, set research and development, production, export, service in one. AOLISHENG industrial heavy-duty slide market share of the world's first.
Widely used in: heavy industry, fire trucks, ships, precision machinery and other fields, won the customer's The unanimous praise throughout North America, Europe, Japan, South Korea and more than 80 countries around the world.
Reviews
There are no reviews yet.