What is the difference between side mount and undermount drawer slides?

Side mount slides fix to the drawer sides and cabinet walls — easy to fit and tolerant of cabinet tolerances. Undermount slides sit beneath the drawer box, hide the hardware for a cleaner look, and need a compatible drawer box with the right reveal. AOLISHENG builds both: side-mount heavy-duty series (2053 / 2576 / 7625) and undermount soft-close series (MK316 / U4510K).

What does full extension mean compared with 3/4 extension?

3/4 extension leaves the back of the drawer still inside the cabinet; full extension brings the whole drawer clear of the cabinet face so you can reach the back corner. Most AOLISHENG heavy-duty and soft-close series are full extension.

How do I choose the load rating for a drawer slide?

Add the heaviest realistic contents, then add 25–30% headroom so the slide is not run at 100% of its rating every day. AOLISHENG ratings run from 100 lb (U1245) through 265 lb (2053 family), 330 lb (2071), 500 lb (2576 family) up to 770 lb (AQ7625K3 twin-slide).

What are soft-close drawer slides and when do I need them?

Soft-close slides use a damper that pulls the drawer shut in the last few centimetres, preventing slamming. They are most noticeable on kitchen and bathroom cabinetry and also reduce the shock load that gradually loosens a carcass. AOLISHENG soft-close options include K2053, U4510K and MK316.

Are stainless steel slides worth it for outdoor or marine use?

Yes — whenever the slide is exposed to weather, salt air, humidity or frequent wash-down (outdoor kitchens, marine galleys, food-prep, coastal installs). AOLISHENG stainless options include W2053, W2576, W5115 and U4510K.

Which AOLISHENG series number maps to which spec?

The stamped codes read: 1245 = 100 lb stainless side mount; 4510 = 100 lb stainless; 5115 = 150 lb; 2053 = 265 lb; 2071 = 330 lb; 2576 = 500 lb; 7625 = 770 lb twin-slide. Remove the drawer and read the code on the inner rail, or send a photo and AOLISHENG will match it.

Can heavy-duty slides be used in RVs, trucks and vehicles?

Yes, with a locking slide so the drawer cannot slide open under braking or cornering. Use locking series such as D5115, D2053 or D7625 for any moving-vehicle storage.

Blog

Drawer Slide Guides

RV Drawer Slides That Stay Shut on the Road: A Locking Heavy-Duty Case Study

Posted by

Aolisheng

September 14, 2026

On September 14, 2026

The B2B challenge: drawers that will not stay shut on the road

A North American RV and caravan OEM came to us with a recurring warranty problem. On rough highways and at every braking event, interior storage drawers would creep open — sometimes fully — scattering contents and, worse, becoming a projectile in a moving vehicle. Their existing coated-steel side-mount slides had no positive lock and enough side play that vibration walked the drawer out of its catch. The engineering team needed a locking, full-extension, heavy-duty slide that an assembler could fit without re-machining the carcass.

Why standard slides failed

No lock: open-roller or basic ball-bearing slides have no mechanism to hold the drawer closed against deceleration forces.
Side play: tolerance slack let the box drift even when “shut”.
Corrosion: in humid or coastal RV use, coated steel pitted within a season.

The AOLISHENG solution: locking heavy-duty ball-bearing series

We specified the AOLISHENG locking family — a lever lock that the user engages near closed, holding the drawer firmly in the cabinet until deliberately released. All three are full-extension, side-mount, ball-bearing, and built for the loads an RV actually carries:

Series	Load rating	Type	Lock	Best for
D7625	500 lb / pair	Heavy-duty, full extension	Yes	Pantry & galley, deepest drawers
D2053	265 lb / pair	Heavy-duty, full extension	Yes	Under-bunk & wardrobe storage
D5115	150 lb / pair	Heavy-duty, full extension	Yes	Shallow cabinets & dividers

Results the OEM reported

Warranty claims tied to “drawer opened while driving” dropped to zero across the first production season.
Assembly time fell because the lock is integrated — no separate latch or catch to source and fit.
Full extension meant end-users could reach the back of deep galley drawers, improving usable storage without a bigger footprint.

Why B2B buyers standardise on this line

Beyond the lock, procurement values predictable batch pricing, low MOQ for new SKUs, and a stamped series code (read it on the inner rail) that makes re-ordering and field service unambiguous. The same locking family scales from 150 lb to 500 lb, so one supplier covers an entire product range.

Compare all 24 AOLISHENG drawer slide series → | Read the drawer-slide buying guide for OEMs →